| Round details | |||
|---|---|---|---|
|
Round 7 of 9 rounds in the 2018 GP3 Series | |||
![]() Layout of the Autodromo Nazionale Monza | |||
| Location | Autodromo Nazionale Monza, Monza, Italy | ||
| Course |
Permanent racing facility 5.793 km (3.600 mi) | ||
| Race 1 | |||
| Date | 1 September 2018 | ||
| Laps | 22 | ||
| Pole position | |||
| Driver |
| Trident | |
| Time | 1:37.959 | ||
| Podium | |||
| First |
| Trident | |
| Second |
| ART Grand Prix | |
| Third |
| ART Grand Prix | |
| Fastest lap | |||
| Driver |
| Jenzer Motorsport | |
| Time | 1:43.797 (on lap 22) | ||
| Race 2 | |||
| Date | 2 September 2018 | ||
| Laps | 17 | ||
| Podium | |||
| First |
| Trident | |
| Second |
| Trident | |
| Third |
| ART Grand Prix | |
| Fastest lap | |||
| Driver |
| ART Grand Prix | |
| Time | 1:39.664 (on lap 8) | ||
The 2018 Monza GP3 Series round was the seventh round of the 2018 GP3 Series. It was held on 1 and 2 September 2018 at Autodromo Nazionale Monza in Monza, Italy. The race supported the 2018 Italian Grand Prix.
Classification
Qualifying
- Jannes Fittje was disqualified as there was not enough fuel in his car to produce sample for scrutineers.[2]
Feature race
.jpg.webp)
David Beckmann
Sprint race
See also
Notes
- ↑ Juan Manuel Correa set the fastest lap, but did not finish in the top 10, so was ineligible to be the point-scorer for the fastest lap. David Beckmann was the point-scorer instead for setting the fastest lap of those finishing in the top 10.
References
- ↑ "2018 Monza GP3 Qualifying Results". Motorsportstats.com. Retrieved 14 January 2022.
- ↑ "GP3 Monza: Beckmann grabs second pole in a row after rain shower". Autosport.com. Archived from the original on 14 January 2022. Retrieved 14 January 2022.
- ↑ "2018 Monza GP3 Race 1 Results". Motorsportstats.com. Retrieved 4 July 2022.
- ↑ "2018 Monza GP3 Race 2 Results". Motorsportstats.com. Retrieved 4 July 2022.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.
